A-PRESIDENT ZENITCEM / Self Ashesive Composite Luting Cement - Dual Cure 9,6 gr

Indications
Permanent adhesive luting of indirect restorations (inlays, onlays, crowns, bridges, endodontic posts) made of nobel metal, non-noble metal, PFM | Zirconia, glass ceramic (crowns and bridges) | Fiber reinforced composite (endodontic posts).

Charecteristics
- Self adhesive
- High bond strength on enamel, dentin, metal and ceramics
- Radiopaque
- Dual-cure
- High mechanical properties

Application
1. Remove the temporary restoration and carefully clean off any residual temporary luting cement from the cavity or prepared core. Rinse with a water spray. Dry using oil-free air, avoid over drying the dentine.
2. Verify the accuracy of the fit of the restoration.
3. Then clean the restoration thoroughly and pretreat as follows:
Etchable glass ceramic:
Etch the restoration with 5% hydrofluoricacid in accordance with the manufacturer's instructions, rinse thoroughly using a water spray and dry using oil-free air, apply silane (e.g. SilanePrimer) in accordance with the manufacturer's instructions.
Oxide ceramics, metal sand metal alloys:
Pre-treat in accordance with the manufacturer's instructions. Unless otherwise stated, sand blast the inside of the restoration with aluminumoxide (< 50 μm), clean with alcohol, and dry with
air that is free of oil and water.
Fiber-reinforced root posts:
Clean the root post with ethanol, dry with oil-freeair, and apply silane (e.g. SilanePrimer) in accordance with the manufacturer's instructions.

Product Code / Package Details
• PRD.ZCEM.TRS Transparent 1x 5ml (9.6gr) + 10x Applicator Tips
• PRD.ZCEM.A2 Universal 1x 5ml (9.6gr) + 10x Applicator Tips